Safe-T-Solve is a specially formulated product designed to remove all types of adhesives, paint, magic marker, lipstick, and scotch tape – light type coatings.

Apply Safe-T-Solve directly onto the surface using a spray, brush, or cloth; the surface must be dry before applying. Let set for 2 to 3 minutes, reapply lightly, and then rinse it off with maximum water pressure or wipe it off with a cloth. (Use a scrapper to scrape off excess build-up.) Reapply Safe-T-Solve and then wipe it off again until the surface becomes clean. For heavily defaced areas, a second application may be necessary.


– Boiling point: 360° F.
– Percent Volatile: 96%.
– Freezing Point: N/A.
– Solubility in H2O: Emulsifiable.
– Appearance/Odor: Light Red/Citrus.
– pH: Neutral.
– Flash Point: 148° F.

Protect all surrounding areas, such as glass, wood, metal, plastic, floors, shrubs, etc. If over spray occurs, wipe it off immediately. Keep this product away from an open flame and/or heat. Contains petroleum based solvents. Applicators should wear a full rubber or PVC suit, rubber boots, rubber gloves, and chemical goggles or a face shield.

Note: This proprietary mixture of petroleum based solvents contain no hazardous ingredients as defined by OSHA’s “Hazard Communication” 29 CFR 1910.1200, except that the material is a skin irritant, due to its defatting properties, and an eye irritant. It is not considered a carcinogen by IARC or NTP.

This product is not listed under section 313 of the Emergency Planning & Community Right-to-Know Act C Title III of the superfund Amendment & Authorization Act of 1986, Public law 99-499, but is listed on the hazardous materials table of 49 CFR 172.101.

Therefore, it must be made clear that we have no control over any waste generated when removing asbestos tiles, masteics, and/or adhesives. This product, as is – in its virgin form – does not fall under hazardous waste criteria.

Users of this product should put all waste into an appropriate disposal container. This should then be followed by your state rules and regulations for proper disposal.

HMIS Rating:

– Health: 1
– Flammability: 1
– Reactivity: 0
– Personal Protection: 3

EST, Inc. has no control over the storage, handling, or use of this product. The guarantee is limited to the purchase price of the defective material only.