Rust Converter

Rust Converter rust treatment is a new development in destroying old rust on metal surfaces and preventing new rust from forming on metal surfaces. It converts rust into a black hard shiny coating.  It is water based and VOC (Volatile Organic Compound) compliant.

Rust Converter is excellent for machine shops, industry, farm equipment, institutional equipment, any surface with rust, waste treatment plants, City and County garages, construction equipment, hospitals, and the home.

ADVANTAGES

– Sanding of metal is not required.
– Long lasting.
– Easy to use.
– Metal may be painted over after treatment.

APPLICATIONS
Use rubber gloves and mix well before using. Apply the solution between 50° F and 90° F. Do not place unused material in the original product container.

No sanding is required, but for best results use a wire brush on the area lightly. Clean off any remaining oil, dirt, or grease before application. Brush or sponge on liberally; careful application will result in a smooth finish.

After a few minutes, a black coating will begin to develop; uneven color indicates additional applications are required for maximum protection (two coasts are usually required). Apply a second coat after 1 to 2 hours of applying the first coat.

For long-term protection and a smoother finish, use a primer and paint, which can be lightly sanded; do not sand the black coating directly. Allow the coating to dry 24 hours before painting.

Clean up can be done with water and detergent.

CAUTION
Do not dilute or alter the product package. Keep from freezing. This product contains synthetic resin. Avoid eye and skin contact. If eye contact occurs, flush with water for 15 minutes and seek immediate medical attention. If skin contact occurs, wash off immediately with water. If swallowed, induce vomiting and call a physician.

KEEP OUT OF REACH OF CHILDREN!