QUICK SHINE

FOR ALL TYPES OF HARD FLOOR SURFACES.

FOLLOW THESE STEPS FOR OPTIMUM SHINE
1. Clean and mop floor.  Use surface neutralizer if possible.
2. After floor is dried apply quick shine coating with nylon mop.
3. Wait 10 to 15 minutes till wax is dried, then buff at high speed.

For High Gloss: Apply 2 to 5 coats of Quick Shine Coating to achieve desired gloss.  High speed buffing is required after each application.

CLEAN UP
Clean pad and other equipment with soap and warm water.

COVERAGE
1 gal may cover from 150 SQ feet to 400 SQ feet depending on number of coats applied.

CAUTION
Keep out of reach of children.  Keep from freezing.