LIGHT DUTY CONCRETE CLEANER CONCENTRATE

Light Duty Concrete Cleaner removes dirt, rust, mold, and mildew. It is ideal for smooth white, gray, and colored architectural concrete, and masonry, marble, and tile floors.

ADVANTAGES

– Can be used indoors and outdoors; no harmful fumes.
– Will not etch concrete.

APPLICATIONS
Make a test panel before general cleaning. Protect and test all non-masonry surfaces.

EXTERIOR CLEANING

– Pre-wet the concrete.
– Apply diluted concrete cleaner with a soft fibered masonry brush.
– Let set for 2 to 3 minutes. Do not let cleaning solution dry on the concrete.
– Rinse off with water or pressure washing equipment (3 gallons per minute at 400 to 600 psi). To avoid streaking, keep lower area wet at all times.

INTERIOR CLEANING
Provide adequate ventilation. Protect floor with poly film, or apply another appropriate method. Protect plumbing fixtures, doorknobs, light fixtures, etc. Follow the procedures above (exterior cleaning). If a water hose cannot be used, use a sponge or brush for rinsing. Thorough rinsing is a must.

DILUTION

– 1 part cleaner/1 or 2 parts water.

CAUTION
Wear rubber gloves while handling or using this product. If skin contact occurs, flood the surface with water, using soap freely. If eye contact occurs, flush thoroughly with water; see a physician immediately. If internal consumption occurs, call a physician immediately; drink a teaspoon or more of milk of magnesia or baking soda.

GUARANTEE/WARRANTY/LIABILITY
EST, Inc. has no control over the storage, handling, or use of this product. The guarantee is limited to the purchase price of the defective material only.

KEEP OUT OF REACH OF CHILDREN!