HEAVY DUTY BOAT CLEANER

Heavy Duty Boat Cleaner is a powerful cleaner designed for the marine industry. It removes barnacles, rust stains, algae stains, and water stains.

ADVANTAGES

– Restores yellowed hulls.
– Will not damage fiberglass, aluminum, or gel coats.
– Removes hull scum instantly.
– Brightens clean aluminum and fiberglass.

APPLICATIONS
Simply spray onto the surface, wait 2 to 3 minutes, and rinse off with a pressure washer. For tough stains, use a nylon brush to scrub before rinsing off.

BARNACLE BUILD UP
Scrub the surface with a nylon brush, scrap if necessary, let the cleaner set for 3 to 5 minutes, and rinse off with a high-pressure washer; repeat, if needed. If the barnacles are very hard and old, repeated cleaning applications may be necessary and grinding or sanding of the surface may be required.

Note: This product contains a blend of organic acids. It may remove wax and/or etch the boat surface (depending on the condition of the surface).

GENERAL CLEANING/LIGHT STAINS
Dilute Heavy Duty Boat Cleaner in a 3:1 or 4:1 ratio of water to cleaner. To ensure dilutions are correct, test a small area.

RESTORATION
Restore the surface with Prime Prep Coat (Item No. P-117). This product will fill in all micro pores and seal the surface. Next, apply Micro Shine (Item No. C-104) to bring back the original, shiny luster. The Micro Shine treatment will repel stains and make future cleaning easier.

CAUTION
Wear rubber gloves and eye protection when working with this product. Do not mix with this product with any household cleaning products. If eye contact occurs, flush the eye(s) with plenty of water for 5 minutes. If skin contact occurs, wash the skin with soap and water. If ingested, do not induce vomiting; seek medical attention.

KEEP OUT OF REACH OF CHILDREN!