EW –2000-P is a highly concentrated product and removes a wide variety of soils and stains from shell eggs in pressure spray egg washing machine operations. Built-in defoamers suppress foam in wash tanks, thereby reducing downtime due to machine inefficiency.

EW–2000-P is designed for use in pressure spray washers in egg cleaning plants, particularly where heavily soiled eggs are encountered. All recommended use concentrations of EW-2000-P are safe to use on aluminum, zinc, tin, brass, copper, steel, or stainless steel surfaces, as well as tile, brick, porcelain, and painted surfaces.

Highly Concentrated – High use dilutions enable low use costs.
Completely formulated – No additives necessary under most conditions.

EW –2000-P is a multifunctional product, which is formulated with a blend of wetting and penetrating agents, alkaline builders, corrosion inhibitors, water conditioners, and de-foaming agents. It is free rinsing and Non-Toxic. A 1-cup of powder solution will sequester 20 grains of water hardness.

EW-2000-P should be used at the rate of 1 to 1.5 cup of powder detergent per 1/gallon of wash water. The exact amount needed will depend upon the soil load, water hardness, and quantity of broken eggs. Wash only cool temperature eggs. Do not re-use wash water. Avoid use of water containing trace levels of iron. Do not immerse eggs in cleaning solution for more than 5 minutes. Temperature of the wash solution should be between 90°F and 115°F and between 20-40°F. higher than the temperature of the eggs being washed. If the temperature difference is less than 20°F. There is a danger of egg contamination due to the soiled wash water. Too low of a temperature will also provide poor cleaning, and may cause excessive foam to be produced. Adequate temperature is must for optimum cleaning.

PACKAGING: Available in 50/lbs container and 450/lbs drum

Note: Eggs that have been washed with these compounds shall be immediately subjected to a thorough sanitizing or potable water rinse.


Eyes: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get immediate medical attention.
Skin: For contact, immediately flush with water. Remove contaminated clothing and shoes. Wash with soap and water. Launder clothing and thoroughly clean shoes before reuse. If skin irritation develops, get medical attention.
DO NOT TAKE INTERNALLY: If swallowed, rinse mouth. Drink large amounts of milk or water. Do not induce vomiting. Call a physician. Do not give anything by mouth to a victim having convulsions or who is unconscious.
Inhalation: If mist or dust is inhaled, remove to fresh air. If not breathing, give artificial respiration. Get medical attention.
ATTENTION: When empty, this container may still be hazardous. Because containers, even after they have been emptied, still retain product residues. All labeled hazard precautions must be observed.