Tile seal 1000 is designed to apply on wet or dry concrete roof tiles.

  • Reduce efflorescence after applying tile seal -1000.
  •  Ready to spray.
  • Leaves Hi gloss on surface of tiles.
  • Dose not turns white.
  • Non-Voc / water base.
  • Safe to use
  • Less than three hour drying time.
  • Can be applied in multiple coats.
  • Can be applied on tiles, after it’s been installed on roof.

Caution: Keep out of Reach of children. Protect eyes, use goggles and rubber gloves and boots. If skin contact, wash effected areas thoroughly with warm water and soap.

Warning: Keep container close if not using. Avoid over spray on tools, ground, or any hard surfaces. If over sprayed remove dry film by scrapping or by using paint stripper.

Packaging: 5gal, 55gal and special request totes