Masonry Coating -WB


Designed for all painted surfaces

Basic use: Use for all types of masonry surfaces, like brick, terra cotta, stucco, blocks, natural stone, limestone, and all concrete surfaces interior and exterior.

Unique features: It is designed to use over on all types of painted surfaces. This special coating does not contain any type of solvent, animal fat, butyl, alcohol or any type of carcinogens. It has very mild sweet odor and is very safe to use indoor and outdoor without any type of mechanical exhaust. This coating will not harm the existing coating or the paint. This coating will safe guard the original paint and protect from weather elements, and make surface more water resistance.

Applications: All surfaces should be dry and clean. Apply with roller or brush. Paint chips or sparkle can be mixed with coating to give special appearance. If applying on non-painted pours surface, apply initial coat without paint chips, let surface dry for 30 t0 45 minutes, then apply second coat with paint chips. Follow same rule for flat and high gloss finish. When mixing use slow paddle mixture or mix slowly with hand mixing stick.

Drying time: Drying time may depend on the ambient and surface temperature. Less humid air and cooler temperature may reduce drying and curing time. Avoid application in hot and humid weather. Always do test panel to determine drying and curing time.

Cleanups: Clean all tools and equipment with warm water and cleaning detergent. For heavy buildups of coating, soak tools and equipment in warm water for 30 to 40 minutes, then rinse off with water.

Warning: Keep out of reach of children. Always use safe handling practice. To avoid skin and eye contact, wear gloves and eye protection when working with this product. If skin contact, wash with soap and water. If eye contact, flush eyes with cold water for 10 to 15 minutes. if indigested, does not induce vomiting, drink cold water and seek medical attention.

Storage: Store product at room temperature. Always keep covered on unused or partial container to keep from drying out and hardening. After long time storage, if separation occurs, mix gently (till whole mix is unified) before using. Keep away from freezing and excess heat.