Pages

Diamond Glow

Curing- Sealer- Hardener- Dust Proffer -Water Repellent For Masonry Surfaces

Description: Diamond Glow concrete densifier, sealer, water repellent and chemical hardener compound is 4 in 1 ready-to-use,” Diamond Hard” colorless liquid, formulated with Nano Fusion Technology. It is design to penetrate deep in to the masonry surface and creating permanent fusion bond with concrete molecular structure. Diamond Glow dose not require burnishing, diamond blade or any other mechanical application method. When properly applied, will offer substantial improvement in abrasion and chemical resistance and will significantly improve the durability of the concrete surface and water repellency compared to untreated concrete surface. As Diamond Glow penetrates into the concrete surface, a chemical reaction (Fusion Bonding) process takes place, producing byproduct that fills in the inner pores of the concrete that cures and harden surface from bottom to the top. This process produces a substantially denser concrete surface with enhanced durability and improved water repellency density and over all strength. In addition to the densifying and hardening action, Diamond Glow also solidifies the concrete, eliminating dusting and pitting. Diamond Glow is safe to use on colored and non-colored masonry surfaces.

Diamond Glow is a VOC free coating and meets maximum VOC content limits of 400 g/L for Concrete Protective Coatings as required by the U.S. EPA Architectural Coatings Rule. Concrete properly treated with Diamond Glow is USDA-accepted.

Features: Imparts water repellency to a wide variety of substances like concrete, sand stone, limestone, natural stone, brick and ceramics.

Benefits:
-Reduces water absorption into the substrate, thus reducing spalling due to freeze-thaw and efflorescence, thereby increasing the life of the substrate.
-Colorless and non-yellowing protection preserves the natural appearance of the substrate.
-Penetrating and breathable
-NO VOC
-Nonflammable

Composition: Water borne, potassium propyl polysiliconate catalyst Nano fusion solution. Water borne, sodium methyl polysiliconate catalyst Nano fusion solution. Transparent clear liquid, complex composition, fusion with Nano metallic reactive minerals.

Applications: Diamond Glow is recommended for use wherever hardened, dust proofed and improved chemical, water repellency and abrasion resistant surfaces are required. Ideal applications include concrete floors industrial plants and warehouses, storage silos, sewage plants, chemical processing facilities, refineries and heavy pedestrian floor traffic areas, such as civic centers, sports arenas, stadiums, hospitals, airports, storage and food warehouse floors and museums.

Water Repellency: As a surface treatment in applications that utilize its ability to impart a water repellent surface and reduce water absorption as it begins to cure.

CTM Test Unit Value
0332 Total Solids Content 90 min at 150°C (302°F) Percent 40-45
0332 Silicone Solids Content Percent 24
0001A Specific Gravity at 25°C(77°F) 1.29
0090A Flash Point, open cup °C (°F) N/A
00077 pH 11.5 to 12.5
Density lb/gal
(g/L) 10.8 (1290)
Solvent (Thinner) Water
Volatile Organic Compound lb/gal
Content (g/L) N/A

Application Methods: Gentle aggregation and mixing required prior to application. Can be applied by dipping, spraying, brushing or, rolling.

Application Precautions:Always test the concentration on a small sample of the material to determine the suitability of your specific use. Surfaces to receive this treatment should be lightly dampened immediately prior to application to maximize penetrations.

APPLICATION
Surface Preparation:
Surface should be clean and structurally sound, remove all residues, curing compounds, oils, sealers, contaminants and laitance before applying. Diamond Glow. Use Citra Strip or HD.Concrete cleaner product from EST INC to strip and deep clean surface prior to application. Existing concrete floor, fill and repair all holes, cracks and deteriorated areas that have been removed to sound and smooth concrete surface.

Apply Diamond Glow after the final cure of the concrete surface. When spraying great care should be taken to protect nearby vegetation or articles from over spray. The material is slight Alkaline. When applying on outdoor surfaces it may damage or kill vegetation and will stain or etch glass, plastic, aluminum and most metals. If contact does occur, wash immediately with water. If a white precipitate of Nano siliconate residue should form because of over-application of the water repellent and washing with water does not remove it, it may be necessary to scrub the surface gently for easy removal.

COVERAGE/APPLICATION RATE

Type of Surface ft.²/gal. m²/L
*Fresh (Newly Placed) 300 TO 350 7.36
Existing (Old) 200 TO 250 4.91
*When used as a curing compound on newly placed concrete.
Note: Coverage rates may vary, depending on the finish and porosity of the concrete.

Storage: Product should be stored at or below 25° C (77°F) in original, unopened containers. The most up-to-date shelf life information can be found on the EST website in the Product Detail page under Sales Specification. Store away from strong Acid type chemicals.

WARNING: Failure to thoroughly wash and remove all excess material from floor surfaces may result in unsightly white stains. Immediately wash off over-spray from glass, aluminum, or highly polished surfaces with water to avoid etching of surfaces.

Burnishing: Is not required. However once the surface is cured, for daily maintenance use slow speed auto scrubber with soft pad.

Cleaning Chemicals: For daily use: Use EST “Neutral Floor cleaner” product for daily cleaning and maintenance.

Drying Time: 4 to 6 hours depending on floor surface porosity and temperature. Diamond Glow dries very quickly on new, virgin concrete. Drying times may be extended on existing (old) concrete due to surface conditions. Restrict foot traffic for at least four hours; 12 hours to 14 hours recommended.

Cleanup: While still wet, equipment may be cleaned quickly and easily with soap and water. Do not allow this product to dry before flushing excess from surfaces.

Precautions: DO NOT DILUTE. Do not apply if the temperature of the concrete is less than 35º F (2º C) or above 135º F (57º C). KEEP FROM FREEZING. If frozen, product should be thawed and agitated slightly, prior to use.

Health Hazards: Diamond Glow is non-combustible and Non-Flammable. Direct contact can result in irritation of the skin and eyes. Inhalation of product mist may result in respiratory irritation. Refer to Material Safety Data for complete health and safety information.

Limitation: This product is neither tested nor represented as suitable for medical or pharmaceutical uses. Not intended for human injection. Not intended for food use.

Packaging:
5-Gallon (18.93 Liter) Pails
55-Gallon (208.20 Liter) Drums

Shipping Limitations:
DOT Classification: Floor Sealer.
Shipping Class-55
Keep From Freezing.

Limited Warranty Information:
Please Read Carefully
The information contained herein is offered in good fait and is believed to be accurate. However, because conditions and methods use of our products are beyond our control this information should not be used in substitution for customer’s tests to ensure that our products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent.