Aqua Cure 30: Water Base

Aqua cure 30 is a concentrated curing and sealing compound. It is use to cure, seal, and dust proof new and old, interior and exterior, vertical and horizontal concrete surfaces such as commercial and industrial floors, sidewalks, basements, garage floors, multi-level parking decks, patios, driveways, and parking areas. Aqua Cure 30 can be used as is, in concentrated form, wherever a thick film, high gloss, sheen finish is desired.


– Water based VOC (Volatile Organic Compound) compliant.
– Can be diluted with water for lower percentage solids.
– Non-yellowing UV stable.
– Skid resistance; dries tack free.
– Will minimize hair-line and premature cracking, dusting, and spalling.
– Long lasting protection for new and old concrete.


– ASTM – C 309 Type 1, class B.
– ASTM – C 1315.
– AASHTO M-148 Type 1, class B.

Technical Data:

– Total Solid: 30% concentrate.
– Weight/Gallon: 8.5 lbs./gallon.
– pH: 8.5 – 9.5.
– Solubility in Water: Yes.
– Appearance/Odor: Milky/normal resin smell.

Applications: Make the proper dilution (below) of Aqua Cure 30 before using. Use a commercial sprayer for efficient application. Aqua Cure 30 should be sprayed-on with an 8001 tip in a fine fog pattern, without spurts and dribbles. If puddles occur, brush or roll them out. Aqua Cure 30 may also be applied with a nap roller, a soft bristle broom, or a lamb’s wool applicator.


– For a light sheen, use a 10% dilution of Aqua Cure 30.
– For a medium sheen, use a 15% dilution of Aqua Cure 30.
– For a high sheen, do not dilute; use concentrate.

Note: For most concrete, use a 10 to 15% dilution. When properly applied, Aqua Cure 30 yields superior curing efficiency. However, good concrete and good concreting practice should be used, as this product is not a cure-all for improperly mixed or placed concrete.

Guarantee/Warranty/Liability: EST, Inc. has no control over the storage, handling, or use of this product. The guarantee is limited to the purchase price of the defective material only.