Pages

Construction

#2 Additive: Acryl Polymeric
#2 Additive is based on Acryl Polymeric chemistry, designed to improve the performance of Portland cement.
It provides high adhesive strength to structurally sound surfaces, such as concrete, stucco, mortars, masonry, plastic, etc.

Acro Seal WB 2000 & 2500
Acro Seal WB is a penetrating sealer, designed to apply on wet or dry concrete surfaces.

Acryl 600
Acryl 600 is a bonding agent for concrete base material.

Acryl Seal 25: Solvent Base
Acryl Seal 25 is a solvent-based alkylalkoxysilane penetrating water repellent. It is designed specifically for warehouse floors, brick masonry, limestone, pre-cast, and concrete surfaces, including blocks where darkening is unacceptable.
Acryl Seal 25 reduces bonding of airborne hydrocarbons, reduces water damage from freeze thaw, protects against efflorescence, and has excellent ultraviolet resistance.

Anti Graffiti Coating: Solvent Based
Anti-Graffiti Coating is designed for all types of vertical masonry surfaces, including brick, concrete blocks, stones, etc. It has long-lasting protection and is breathable; graffiti may be removed several times before re-coating is necessary.

Anti Graffiti Coating: Water Base
Anti-Graffiti Coating is designed for all types of vertical masonry surfaces, including brick, concrete blocks, stones, etc; it can be used on painted surfaces, indoors, and outdoors. It has long-lasting protection, and is breathable (it is odorless); graffiti may be removed several times before re-coating is necessary. Anti-Graffiti Coating is also VOC (Volatile Organic Compound) compliant.

Aqua Cure 30: Water Base
Aqua cure 30 is a concentrated curing and sealing compound. It is use to cure, seal, and dust proof new and old, interior and exterior, vertical and horizontal concrete surfaces such as commercial and industrial floors, sidewalks, basements, garage floors, multi-level parking decks, patios, driveways, and parking areas. Aqua Cure 30 can be used as is, in concentrated form, wherever a thick film, high gloss, sheen finish is desired.

Aqua Seal 20: Water Base
Aqua Seal 20 Water Based is a water proofing sealer for concrete and masonry surfaces. It is designed for concrete surfaces, decks, pavement, parking structures, ramps, walls, and floors. Aqua Seal 20 protects against moisture, weathering, corrosive adverse effects of de-icing salt, and spalling.

Aqua Seal 25: Water Base
Aqua Seal 25 Water Based is a water proofing sealer for concrete and masonry surfaces. It is designed for concrete surfaces, decks, pavement, parking structures, ramps, walls, and floors. Aqua Seal 25 protects against moisture, weathering, corrosive adverse effects of de-icing salt, and spalling.

Bio-Sorbe
Bio-Sobre is design to absorb oil and grease stains and spills from concrete and various hard surfaces.It is a dry absorbent, micro molecule powder combined with oil and grease digesting enzymes, fusion into one amazing formula that both absorb and digest oil and grease stains from the concrete surfaces. Bio-Sorbe soaks into the concrete, breaks down oil deep in the pores, and molecularly locks onto oil particles.  As it dries, the oil is pulled up to the surface and absorbed. As Bio-sorbe enzymes begin to digest oil and grease, and wet powder begins to transform into dry powder.  When it is completely dry, the powder is simply swept up for easy disposal.

Blckade
Blockade is an advance water-repellent concrete mortar additive specially designed to be used in the manufacturing of block, pavers, colored blocks, colored pavers, etc. It is also recommended for blocks admixture, pavers admixture, colored blocks and pavers admixture, split face blocks and  integral waterproofing of any concrete material, and blockade mortar admix and mortar additive.
Blockade is composed of high molecular organofunctional polymers of natural fatty acids combined with surface-active agents.

Bond Crete – 101
is a specially formulated product for concrete sand and cement products. Designed to bond old and new concrete surfaces, and use as an additive.

Coat and Peel
Coat and Peel is a water base VOC compliance strippable masking material for protection of glass and metal surfaces from the damaging effects of acid and other harsh cleaning chemicals.

Concrete and Masonry Sealers

Concrete Densifier and Hardener CDH-4000 
This is a blend of inorganic Nano polymer materials that penetrates cementitious surfaces to increase density and hardness.

Concrete Equipment Cleaners Concentrate
Concrete Equipment Cleaner is used to clean off concrete on equipment.

Concrete Floor Finish High Gloss-WB

Cure and Seal 25 Solvent Based
Cure and Seal 25 Solvent Based is a concrete curer and sealer that produces an impermeable seal for efficient moisture retention.  

Cure and Seal: Water Base
Cure and Seal Water Based is a concrete curer and sealer. It may be quickly and easily applied to cure, seal, and dust proof new and old, interior and exterior, vertical and horizontal concrete surfaces. When properly applied, Cure and Seal produces an impermeable seal for efficient moisture retention. It is ideal for application on commercial and industrial floors, sidewalks, basements, garage floors, multi-level parking decks, patios, driveways, and parking areas.

Diamond Glow
Diamond Glow concrete densifier, sealer, water repellent and chemical hardener compound is 4 in 1 ready-to-use, “Diamond Hard” colorless liquid, formulated with Nano Fusion Technology. It is design to penetrate deep into the masonry surface and creating permanent fusion bond with concrete molecular structure.

Dura Cote
Masonry and Basement Paint is intended for waterproofing, sealer, and decorating walls of concrete, stucco, brick, concrete blocks, haydite blocks, cinder blocks, pumice blocks and other masonry and stucco surfaces.

E-Cure 101
E-Cure 101 is a liquid additive made specifically for use in cement products where efflorescence is a problem.
E-Cure 101 prevents and binds the chemicals in cement and mortar mix. It keeps the additives from leaching out onto brick, block, or other mortar set products. It is also excellent for precast and poured in place concrete.

Enviro Seal 707: Water Base
Enviro Seal 707 is a water-based alkylalkoxysilane penetrating water repellent. It is designed specifically for brick masonry, limestone, pre-cast, and concrete surfaces, including blocks where darkening is unacceptable.
Enviro Seal 707 reduces bonding of airborne hydrocarbons, reduces water damage from freeze-thaw, protects against efflorescence, and has excellent ultraviolet resistance; it is VOC (Volatile Organic Compound) compliant as well.

EST AS-25
EST AS-25 is designed for use on cured masonry surfaces, like concrete block, pavers, sidewalks, driveways, pre-cast and poured place concrete.

Fast Setting Cement FSC -4000 
This is a designed for use on cement. Print Test Methods. Print Mixing Guide.

Fast Setting Concrete Mix-FSC-3000
Concrete Mix is a workable, fast setting, high quality concrete repair and concrete restoration material, that is ideal where fast strength gain, high durability and low shrinkage are desired. FSC-3000 Concrete Mix, ideal for concrete repair, is a multipurpose, fast setting product that can be used for repair and construction of pavements, formed work, footings, setting posts, industrial floors, machine bases, and concrete repair.

Flexi Patch
Flexi Patch was developed specially for use as joint filler and patching concrete surfaces in industrial and warehouse floors.

Graffiti-Off
Graffiti-Off paint remover is an effective water based formula that attacks paint so it can be easily be sprayed or wiped away.

Gym Floor Finish High Gloss- WB

Heavy Duty Cleaner: Acid Free
This powerful cleaner is a balanced chemical compound. It’s minimum foaming properties gives free rinsing, contains no hydrocarbons or other chlorinated solvents. It is effective in dissolving heavy deposits of oxidized waxes and polymers, thick layers of downtrodden greases backed on deposits of carbon. Fire damaged hard surfaces soot, resins, gums, oils, inks, dyes and hard soap scum.

Leak Detector-5000
Leak detector-5000 is specially designed to detect leaky roofs. This hi-tech Powder is formulated with synthetic and natural micro fibers, and with fusion e3 micron technology, to penetrate deep in to micro and sub micro cracks on to the roof surfaces. It leaves visible tracks by leaving sub micron particles suspended on to the top surface for easy detection.

Liquid Epoxy Resin
ESRES EA-417300 is the standard, undiluted, general purpose, diglycidyl ether of Bisphenol-A epoxy resin.

Liquid Quartz Concrete Densifier, Sealer and Chemical Hardener
Liquid Quartz concrete densifier, sealer and chemical hardener compound is a ready-to-use, colorless liquid, formulated with chemically reactive raw materials to harden and dustproof concrete. When properly applied, will offer substantial improvement in abrasion and chemical resistance and will significantly improve the durability of the concrete surface when compared to untreated concrete.

Masonry Coating -WB
use for all types of masonry surfaces, like brick, Terra cotta, stucco, blocks, natural stone, limestone, and all concrete surfaces interior and exterior.

Mold Release MR-3000
MR-3000 Concrete Form Release Agent is a natural oil-based product, enhanced with micron lube technology, which provides quick easy and clean release of concrete forms.

Nano Bond Additive 123 for Clay
This is designed to use with many various types of metallic clay materials such as, magnesium, calcium, gypsum, aluminum, and most non-metallic clays. Nano Bond Additive is designed to increase bonding and flexural strength.

Paint Equipment Cleaner-P2
Paint equipment cleaner is designed to clean paint guns, sprayers, nozzle and all paint handling equipment.

Patch Master 2000-50
For patching and topping concrete surfaces.  Filling joints, and repairing on concrete floor.  For laying flagstone and paving bricks.

Plasticizer
Plasticizer is a specially formulated product for concrete sand and cement products.

Professional Water Sealant
Professional Water Sealant is a clear, penetrating, breathable water repellent formulated using durable Room Temperature Vulcanizing Silicone Rubber. For use on above-grade concrete, brick, block, pre-cast, pavers, manufactured stone, natural stone, stucco, wood and other porous building materials which allow penetration of the water repellent.

Quick Release
Quick Release releases concrete molds. It is safe for all types of concrete molds and does not interfere with concrete curse or colored concrete.

Safe Restore
Safe Restore is a breakthrough detergent that provides remarkable versatility, cleaning power and safety all in one product. It is capable of removing the deepest pollution stains, mineral and metal oxide stains from a wide variety of surfaces. It is an effective coating remover and safely cleans glass and anodized aluminum when used as directed.

Salt Protector S100
Salt Protector S100 is a deep penetrating sealer designed to protect concrete surfaces, decks, pavements, parking structures, ramps, bridges, marine platforms, lane barriers, etc.; it also protects against corrosive, adverse effects of de-icing salts (chloride screens), moisture, weathering, and scaling of concrete structures.
Salt Protector S100 is also excellent for brick masonry and many types of stone masonry.

Sand Joint Stabilizer Concentrate
Sand Joint Stabilizer is a durable acrylic coating that consolidates loose sand joints and protects them, concrete, and brick pavers from water penetration. Treated surfaces resist water related problems, including freeze-thaw damage, efflorescence, and weed growth. Sand Joint Stabilizer also limits staining from spilled oil and food and drink; treated surfaces are easy to clean and long lasting.

Septum-Paint Additive
Septum is a paint additive made with Nano enhanced Bio -Active advance technology.  It effectively prevents mold and many harmful bacteria re-growth on painted surface. This product is NOT a mold or bacteria killer or a repellent.

Silane Seal 10: Solvent Based
Silane Seal 10 Solvent Based is a deep-penetrating, breathable, organofunctional Nano fusion RTV sealer for concrete surfaces, such as: concrete decks, driveways, natural stone, bridges, parking garages, airport runways, pavers, bricks, limestone, flagstone, parking decks and smooth precast surfaces.

Silane Seal 20: Solvent Based
Silane Seal 20 Solvent Based is a penetrating sealer for concrete surfaces, such as concrete decks, bridges, parking garages, airport runways, and smooth precast surfaces.

Silane Seal 40: Water Based
Silane Seal 40 Water Based is a penetrating, polysiloxane based water repellent for limestone and precast and concrete surfaces.
Silane Seal 40 is made to use on concrete decks, bridges, parking garages, limestone, and smooth precast surfaces.

Silane Seal 50: Water Based
Silane Seal 50 WB is a penetrating, Polysiloxane based water repellent for lime stone pre-cast and concrete surfaces. Silane Seal-50 WB is made to use on concrete decks, bridges parking garages, limestone and smooth pre cast surfaces.

Silane Seal 100
Silane Seal-100 is a deep penetrating sealer designed to protect concrete surfaces, decks, pavements, parking structures, ramps, bridges, marine platforms, lane barriers, etc.; it also protects against corrosive, adverse effects of de-icing salts (chloride screens), moisture, weathering, and scaling of concrete structures. Silane Seal-100 is also excellent for brick masonry and many types of stone masonry.

Silane Seal 100: Water Based
Silane Seal-100 Water Based is concentrated formula that is designed to be diluted for easy use. It is a deep penetrating sealer designed to protect concrete surfaces.

Soil Binder & Mineral Neutralizer
This product is design to control crystal growth and neutralize any minerals, salt and efflorescence due to high humidity and moist environments. Once the crystal growth and neutralization process is completed the time release mechanism of soil binding property will create flexible yet hard film, to bind and plasticize remaining loose soil and dust particles.

Strip-All
Strip-All heavy-duty paint remover is a specially formulated product to remove all types of coating, paint, decals, adhesives, Scotch-Lite coatings, etc.

Sub Zero Patch
SUB ZERO PATCH FOR COLD STORAGE AND FREEZER WAREHOUSE FLOORS
Sub Zero Patch was developed specially for use as joint filler in industrial floors and freezer floors. Sub zero patch cures at as low as (-50) minus 50°F. Also designed to be used in freezer rooms to fill construction joints.

SW-100 Soft Water
This special product is designed to use in hard water with heavy mineral concentrations.

Tile Seal 1000 High Gloss
Tile seal 1000 is designed to apply on wet or dry concrete roof tiles.

Tile Seal 2000 Matte Finish
Tile seal 2000 is made with Hi Tech poly Alkoxy Silane base material. Tile seal 2000 is made to apply on dry concrete tiles.

Wet-Look 2000-109

Wet Look-25 Masonry Coating: Solvent Based
Wet Look 25 Masonry Coating is designed for all types of vertical masonry surfaces, including brick, concrete blocks, stones, etc. It has long-lasting protection and is breathable; graffiti may be removed several times before re-coating is necessary. 

WP Blockade Cement Mortar Additive
WP Blockade Cement Mortar Additive is a water-repellent additive for mortar joints.

Other Construction Products