Well Water High pH Adjuster – 120

Well Water pH Adjuster-120 is an all-natural, food grade and ecofriendly product that is designed to adjust pH and water hardness naturally in one step more effectively than many conventional and mechanical application methods. This product works extremely well with various hardness and pH of well water. It makes water pH stable, chelates various dissolved minerals, and helps blend various fertilizers and herbicides which enhance the effectiveness and performance of the fertilizers and herbicides.


  • Improves solubility of various fertilizers and herbicides
  • Improves effectiveness of various micronutrients.
  • Helps spray-ability and improves absorptions rate.
  • Reduces water hardness and lower pH for long-term stability.
  • Helps maintain microbial activity in soil.
  • Use less water per acre to spray various blends of chemicals.

What Is pH:
The pH is the measure of the hydrogen ion concentration in a solution. The pH takes on values from 0 to 14, with 0 representing the most acidic solution and 14 the most alkaline. The pH of agricultural water plays a critical role in plant health, and it influences the efficacy of pesticides and growth regulators. Plants grow best in a slightly acidic (pH 6.0 to 6.5) soil solution, and the pH of the water used to mixed growth regulators and pesticides, control the chemicals’ half-life.

Well Water Conditions:
Most of the well water pH ranges from 8.5 to 10.5, depending on the region and underground mineral formations. Some well water shows heavy brine and mineral concentrations due to the depth of well and location. Some well water pH shows as high as 10.0 and above.

Note: Well water also contains various microorganisms, harmful minerals, brine, and other contaminations, which some of them are beneficial and some are harmful for human consumptions and for agricultural use. Well water must be tested to verify containments before its use. The pH must be adjusted each time before there is use of the well water.

Technical Data:

pH range—————————————– 3.1 to 4.5
Specific Gravity——————————— 1.05
Color——————————————— Clear
V.O.C. Content——————————— 0.0
Odor——————————————— None
Flash Point————————————– None
Boiling range———————————— Same as Water

Mix Rate Table:

Well Water pH Adjust 120 Mix Rate per Gallon of Well Water
Well Water pH Range Add Rate per Gallon Maintain pH ValueRange
10 to 10.5 3 to 4 fl. oz. 7.5 to 8.5
9 to 9.5 2 to 3 fl. oz. 7.5 to 8.5
8 to 8.5 1 to 2 fl. oz. 7 to 7.5

Note: When pumping out well water from the well, pass water through a filtration system to remove all large and fine floating debris, before adding pH Adjuster-120. Small amount of well water must be pre- tested to determine the pH value prior to adding pH Adjuster-120 to a larger quantity of well water. Extremely high pH may require additional use of Well Water pH Adjuster-120. Well water hardness and dissolved minerals can affect the dosage requirement of pH Adjuster-120. Do not add this product directly into the well water. Do not mix this product directly with herbicides, pesticides or other fertilizers and chemical products. Consult your distributor or supplier for a customized and tailored application rate of this product for your well water condition.

Store at room temperature, or above freezing temperature 32°F and above. Keep this product from freezing.

Personal Protection:
Wear rubber gloves and eye protection when handling this product. If eye contact, flush eyes with plenty of water for 10 minutes. If indigested, do not induce vomiting, drink water. If stomach pain occurs, call a physician. Keep away from open wounds and cuts. Accidental contact may cause allergic reaction or swelling. If this happens wash affected areas with cold water and soap. See physician for further treatment.

Keep out of reach of children. Do not mix this product directly with herbicides, pesticides or other fertilizer and chemical products.